Tweet
Here we have ready for ebay one 600n pro. no ordinary heli this all top notch gear as anyone who knows helis will testify.
If you look closely there is a little scratch on the canopy but apart from that its pretty near perfect. I just flew it today and the landing was almost perfect...
Recently i started gently touching the skids during high speed low passes on our nice plank fliers patch. The guys at the club were quite impressed - they thought that if you did this with a heli it would simply explode. I must have done this about 40 times without incident but today it must have been a little faster and a little harder (actually I could see the parallel cuts the skids made in the turf afterward). Result was the bom tipped up into the disc and there was a loud bang with everythng comming to a very sudden stop.
It took me a while to stop laughing!
Looks like the frame is ok despite the tank being flung about 2m clear. The tail case includig gears and shaft is fine having been flung completely off the boom, though tail blades are gone. The boom and stays are toast as is the metal boom clamp. The damned horizontal fin we all keep getting in the fin set and throwing away is undamaged. Front umbrella gears are toast and theres some damage to the auto gear. Main shaft is bent and the links to the grips are missing. Alll my lovely BLS servos are OK.
If you look closely there is a little scratch on the canopy but apart from that its pretty near perfect. I just flew it today and the landing was almost perfect...
Recently i started gently touching the skids during high speed low passes on our nice plank fliers patch. The guys at the club were quite impressed - they thought that if you did this with a heli it would simply explode. I must have done this about 40 times without incident but today it must have been a little faster and a little harder (actually I could see the parallel cuts the skids made in the turf afterward). Result was the bom tipped up into the disc and there was a loud bang with everythng comming to a very sudden stop.
It took me a while to stop laughing!
Looks like the frame is ok despite the tank being flung about 2m clear. The tail case includig gears and shaft is fine having been flung completely off the boom, though tail blades are gone. The boom and stays are toast as is the metal boom clamp. The damned horizontal fin we all keep getting in the fin set and throwing away is undamaged. Front umbrella gears are toast and theres some damage to the auto gear. Main shaft is bent and the links to the grips are missing. Alll my lovely BLS servos are OK.
Comment