As most of you know I have been hunting for a trade for a T500 and aswell as advertising on here I also put a swap ad on BMFA.
I just received this email:
Hi Nick,
My name is Ossie and I'm 12. I have an E-Sky Belt CP and as you can
guess, being based in China, E-Sky doesn't have amazing product
support or instructions. If you are quite experienced, do you think we
could have a swap on the Blade 400 for my BCP? I would like the fact
that the product support is in england etc. The Belt CP has one slight
problem though, when the motor spins it spins the main gears but not
the shaft. A little tightening may help but i'm a bit too scared too
try anything. It has an upgraded ESC and the normal tranny and rx were
taken out because they made it harder to fly so you can use your own
tx. It has been sitting in my garage for a while now as i'm too scared
to fly it with the fact that the instructions are like gobbledygook to
me and UK product support would be a benefit if i did get the blade
400. the belt cp comes with two canopies, one sprayed by me and one
normal in case you don't like the sprayed one (made by me)
2x batteries one that would be good for setting up/hovering and one
that would be suited for forward flight as it has only a few cycles.
plenty of spares, gyro, servos, motor and ESC are all included. Also
has a good quality case. This may sound dodgy, but if you have it, it
will be 3rd hand. fear not as it has NEVER been crashed and works
perfectly (apart from what I mentioned earlier). If it turns out you
do need spare parts if you get it (only related to the shaft) i would
be happy to pay for it.
I would be extremely happy if we could swap because i would love to
continue with helis with confidence.
Ossie
(p.s. balancing charger also supplied and battery tester. This is all
worth over the £160 you ask for the Blade and i ask you to think
about this as you would get a heli and this little boy confidence to
fly
--------------------
Blade 400 artf
http://www.bmfaclassifieds.co.uk/detail.php?id=2760
Regards,
The BMFA Classified Ads Service
Bless him if legit but somehow I think not, isn't Esky chinese? all the parts seem to come from there.
I have also decided to keep both Blades after having bought an rx for the second one today, its better to advance in what you like doing before getting an expensive heli and destroying it.
I just received this email:
Hi Nick,
My name is Ossie and I'm 12. I have an E-Sky Belt CP and as you can
guess, being based in China, E-Sky doesn't have amazing product
support or instructions. If you are quite experienced, do you think we
could have a swap on the Blade 400 for my BCP? I would like the fact
that the product support is in england etc. The Belt CP has one slight
problem though, when the motor spins it spins the main gears but not
the shaft. A little tightening may help but i'm a bit too scared too
try anything. It has an upgraded ESC and the normal tranny and rx were
taken out because they made it harder to fly so you can use your own
tx. It has been sitting in my garage for a while now as i'm too scared
to fly it with the fact that the instructions are like gobbledygook to
me and UK product support would be a benefit if i did get the blade
400. the belt cp comes with two canopies, one sprayed by me and one
normal in case you don't like the sprayed one (made by me)
2x batteries one that would be good for setting up/hovering and one
that would be suited for forward flight as it has only a few cycles.
plenty of spares, gyro, servos, motor and ESC are all included. Also
has a good quality case. This may sound dodgy, but if you have it, it
will be 3rd hand. fear not as it has NEVER been crashed and works
perfectly (apart from what I mentioned earlier). If it turns out you
do need spare parts if you get it (only related to the shaft) i would
be happy to pay for it.
I would be extremely happy if we could swap because i would love to
continue with helis with confidence.
Ossie
(p.s. balancing charger also supplied and battery tester. This is all
worth over the £160 you ask for the Blade and i ask you to think
about this as you would get a heli and this little boy confidence to
fly
--------------------
Blade 400 artf
http://www.bmfaclassifieds.co.uk/detail.php?id=2760
Regards,
The BMFA Classified Ads Service
Bless him if legit but somehow I think not, isn't Esky chinese? all the parts seem to come from there.
I have also decided to keep both Blades after having bought an rx for the second one today, its better to advance in what you like doing before getting an expensive heli and destroying it.




Comment