Has anyone got

[nightstalker]

some Frame Mounting Blocks for trex 600 nitro??
I have my A test next week and iv just come back from the field and 2 of them have lost there threads and i dont want them to seem im holding my skids on with zip ties lol,
So im only after 2 and at the mo moneys tight for me as im unemployed and cant get any in in time for next weekend.

so if any one has some spare only 2 needed and will to let me borrow just so i can get through next weekend and il send them back would be great.


sorry if this is out of order asking but kinda bit stuck

cheers

stevie

[electricsceadu]

i haven't got any
but can't you tap the holes out m4 and use m4 bolts in them

[moyesboy]

Or drill them out and use slightly longer m3 bolts and nuts

[Mikee]

Sorry Stevie

can't help Im afraid... hope you get it sorted in time.. If necc for time being.. screw some self tapping screws in there.. or longer bolts with nuts on the back

anything is worth a try.. if these peeps can't help

Mikee

[MrKev]

I could send you some M3 press in thingmybobs - can't remember the proper name, erm, 'threded inserts'. Basically, you drill the hole out, (to about 4mm) then press in these things to leave you with an M3 thread again.

Helicoils possibly?
edit: no, not helicoils, but more like these: http://www.anchorinserts.co.uk/parts...0.php?src=tree. PM me your address if interested...

Oh, and, good luck with your A test....

[nightstalker]

Hi guys
wish i could put a nut underneath but the bolt comes out right next to the frame so close i cant fit a nut on.

The tapping out part sounds a good idea but i dont have whats needed to do this plau bolts in time.
It bugs me that something so small can be a pain in the but and be such a hinder.

Hey MrKev thank you for taking time to post and i would like to take you up on the offer to get this sorted, so iv sent you a pm mate and thank you again to everyone.