Servo plugs

[sacko]

Does anybody know where to get these from? I am just doing an order from Midlands but cant see any on their site or a couple of others.

[Andy from Sandy]

What do you mean by servo plugs? Are you looking to crimp your own plugs on the end of the servo lead?

[sacko]

Both really, but mainly need the plastic part if possible.

[darryl]

Ripmax Y-MA2165 - Servo Plug Kit (8 Ends) Pack A - All Items - Wheelspin Models UK

hth

[Janek]

ASHTEK Electronics

This site has all you could possibly need, used them myself on a couple of occasions, good service

[Andy from Sandy]

Wheel spin show out of stock.

Try Inwoods.

Try http://store.modelpower.co.uk/jr-ser...lead-131-p.asp

[sacko]

Ta all

[darryl]

Sorry, wheel spin models out of stock, try this:

Futaba Servo Plug Kits x5

hth

[steve b]

sacko
i get all mine from here
www.component-shop.co.uk

cheap posting aswell

steve

[sacko]

Anyone know if the Futaba plugs fit the align servo?

[darryl]

They will all fit each other, although there is a lip down the side of the futaba plug to stop any reverse polarity plug togethers. I usually remove it with a scapel and file it smooth with a needle file

hth

[sacko]

Dont think they do as I just found one and tried it, the pins are a bit longer

...I maybe wrong though.

Anyone know where to get Align servo plugs?

[whirlybird]

Hi Sacko

Don't know if you need terminals and plastic housings. If so, read on.

I used to use all types, until I found these.

Plugs Type JR + pins, 5 sets : Connectors : Accessories from Overlander Batteries

They are slightly different design to others, but superb quality. Never had a problem since I started using them.

Available in 5s or 25s, for JR or Futaba. Highly recommended.

Hope this helps

Jeff