engine starter for t600

[DIJ]

along with a 4s 5000mah lipo and it starts my 90 easily. If you don't have a 6s lipo charger, consider a 4s lipo as it will work fine.

Good advice, less chance of damage from hydrolock and my dynatron starts my R90 fine with a 4S 2500 mAh lipo

[adieuk]

thank you dave
ill get one on order m8 thanks

[Made2Fade]

last thing before you pack up pull off the fuel tube and start the motor, and keep going until it will fire no more. This gets rid of the rest of the fuel in the motor.

sometimes when the tank is full fuel can run into the motor and fill it up.
A clip on the fuel line can help with that.

When the motor won't turn, last resort is whip off the canopy and remove the glow plug to spin the excess fuel out.

What i do is when im emptying the dregs of fuel that remain in the tank, after it is all out i unclip the fuel clip at the carb end and suck out any excess in the carb Another way of doing it.

[adieuk]

What i do is when im emptying the dregs of fuel that remain in the tank, after it is all out i unclip the fuel clip at the carb end and suck out any excess in the carb Another way of doing it.

i bet it dosent taste very nice

[callum]

my 9.6v BOSH Cordless drill starts my 50SX-H with ease

[moyesboy]

I went a whole season using a chordless drill as a starter, just a cheap JCB 14.4v.
However on a really cold day with snow on the ground it just wouldn't spin my os.50 fast enough to get it going and I had a wasted trip to the field. Back at home after the drill and motor (and glow stick) were warmed up in the house it started immediately.
So I bought a cheap old starter off ebay and strapped one of the drill batteries to it and this works a treat.

The expert on starter and lipo setups is Rogbt as he went through the whole set without success trying to turn a rather badly put together clutch assembly at the Derby fly-in.

[Made2Fade]

i bet it dosent taste very nice

haha very good
Just to clarify, use the pump to do that lol