Works ok but is slow for me

[Sqwidge]

Am i correct in thinking that on your TX where you set it up and it says for example 85, -75, -75, that if you increase said numbers then it speeds up your servo's?
I'm getting to the point where I flip on a regular basis and its starting to feel slow and I would like it to pitch and roll quicker.
Is this the right way to go about it?

[Tim Procter]

Swash Mix if that is what you are talking about. Yes.

[Andy from Sandy]

Am i correct in thinking that on your TX where you set it up and it says for example 85, -75, -75, that if you increase said numbers then it speeds up your servo's?

Nothing you change in the tx is going to make the servos move faster.

Are you asking about your blade 400 and dx6i? Are you asking about the swash afr figures?

Assuming you are then by changing the figures you will change the collectitive pitch and cyclic pitch. As you increase the amount of pitch, you have to check that the washout block doesn't bind up and that at maximum collective pitch you don't bind up the head when applying maximum aileron or elevator. This is where a cyclic ring fitted to your TX helps stop binding the head when pushing the cyclic stick into the corners.