model avionics trottle jocky help

[loopking]

im thinking of getting the model avionics throttle jocky for my raptor 50.
could anyone tell me if these are any good or not and wot there like to set up.

thanks
loopking

[Tosh]

Rev Max always worked better for me and on a cheaper servo.

[loopking]

i have a revmax 30 on my trex 600 but im having problems getting it right

[Tosh]

you sure thats not a rev lock 30?

[robgt]

Throttle Jocky Pro is a governor.
Throttle Jockey RevMax is a limiter.

The governor tries to increase the throttle (from minimum throttle up) to whats required in order to try and maintain your defined headspeed.

The limiter tries to reduce the throttle (from maximum throttle down) to whats required in order to try and maintain your defined headspeed.

I prefer the limiter to the governor personally, but they both work well and are really easy to setup.

Cheers,
Rob

[Dedcalm]

I have used a TJ Pro for years and am pleased with the results, I have it coupled to a 3 pos. Switch on the tx so can have it off, or at 2 different head speeds

[Andy from Sandy]

im thinking of getting the model avionics throttle jocky for my raptor 50.

Do you have access to a tacho? If not then you will better off getting a governor that can be setup without one.

I have it coupled to a 3 pos. Switch on the tx so can have it off, or at 2 different head speeds

That is how I was advised to set them when I started and I think it gives the most flexibility.

[loopking]

your right there tosh i ment revlock 30 i have now got it set up pretty good now thanks to the members on this site so may by another one for my rappy 50

thank you all for your help