Tail Trouble

[Twisted]

On my twister gold having a problem with the tail servo traveling across when in heading hold mode, when in standard mode the tail servo does not drift to one side of the other, but as soon as you switch to HH mode, and put a little input in to the tail, the servo does not stop traveling across until it reaches the end of its travel. hope you get what i am on about and some ones able to help me.

twister gold
stock ESC and Motor
gyro CSM 310
servo futabas3154 (have tried 3 diffrent servos but same problem with all)
TX DX7
RX AR6100

[Made2Fade]

Rebind your RX

[Brian Gifford]

Rebind your RX

Ever had that sense of Deja -vu, Lee?

[Twisted]

just tried did not make a diffrence.

[Made2Fade]

What gyro gain are you binding with and are you using the GEAR channel for it or the gyro menu? When you do it make sure the heli doesnt move at all.

[Smoothound]

It's normal behaviour for a HH gyro when it's on the ground.

You give a left input and the heli doesn't move so the gyro senses no movement and just keeps adding to the input until it does move which it won't. It will keep doing this until the servo travel is all used.

Will be fine in the air

[Twisted]

nope it spins round in the air. looks like it might be a faulty gyro!