Neckstrap balancer

[zoombolt]

After swapping my 6EX tranny for the super sexy 10CHG I'm on the hunt for a neck strap balancer that fits it.

My 6EX had a horizontal neck strap clip on the radio, the 10 CHG has a vertical neck strap clip & I like the overall balance they give but can't find one for love nor money. Any ideas anyone.

I'm also on the hunt for some tranny legs that prop the transmitter up at about a 45 degree angle. Don't know what they're called or where to find them either. Tralled some sites but can't find diddly.

Any help/steer to web site apprieciated.

[old gimmer]

Dont know about the neck strap balancer but I think Motors & Rotors sell the tranny stands

[Mikee]

What you mean something like this Fast Lad Performance

[Andy from Sandy]

Yes, except fast-lads want £19.00 and are out of stock but here
http://www.mscomposit.com/electronics/transmitters/accessories_179/transmitter-holder_13096.html
is less and in stock! Part of Europe so no import duty or stuff to worry about. There is also a slightly longer one, THV053.

[zoombolt]

Yes, except fast-lads want £19.00 and are out of stock but here
http://www.mscomposit.com/electronics/transmitters/accessories_179/transmitter-holder_13096.html
is less and in stock! Part of Europe so no import duty or stuff to worry about.

Think I'll go for this puppy. Thank you all, had a problem finding any of this stuff.

[zoombolt]

Think I'll go for this puppy. Thank you all, had a problem finding any of this stuff.

Jesus, just tried to buy it & the shipping costs the same as the balance thing. £36.00 in total???

Think I'll shop about a bit or wait till FL have them in.
Thanks all....

[Mikee]

Ok Tx stand then... free postage and packing... bargain at 9 quid and he has other colours on his Ebay store as well

Radio Controller Transmitter TX Aluminum Stand Red UK on eBay, also Parts Accessories, Aeroplanes, Radio-Controlled, Toys Games (end time 15-May-09 02:00:40 BST)

[Brian Gifford]

Definite bargain. Thanks, Mike.

[Andy from Sandy]

Sorry zoombolt. That website is just taking the proverbial.

[Mikee]

Definite bargain. Thanks, Mike.

No Probs Brian.. did'nt know I needed one till I bought it.. Mine's in silver

Mikee

[SadSack]

Hi
I got neckstrap/bal from a guy on Helifreak HelicopterJohn or Helicopter John is used it on futaba 10c and now fg very nice and would guess work for other tx

I paid 23$ shipped

[TrexMADuk]

Me too - HERE

[Guest]

Hi
I got neckstrap/bal from a guy on Helifreak HelicopterJohn or Helicopter John is used it on futaba 10c and now fg very nice and would guess work for other tx

I paid 23$ shipped

I made enquiries to helicopterjohn as to whether it would fit the Futaba 10CG and he kindly replied with a very comprehensive answer:

Hi Jack,

I own a Futaba T10CHP and I have one of my transmitter balancers mounted on it and it works fine. On that particular model the slot is all the way in instead of fully extended like the 14MZ. The design of my unit allows it to be mounted on either the hole going across or up/down. The top bracket has a screw in the slot that allows it to swivel 360 degrees which allows positioning for either transmitter strap hookup. I personally don't own or currently know of anyone that has the Futaba 10CG so I can't be sure that they didn't change something on the thickness of the stud with the hole in it that protudes from the transmitter.

I can send you a picture of mine with the transmitter balancer installed if you would like. All I need is your e-mail address or you can send me a message to {removed email so he is not spammed} requesting the picture.

If you decide to purchase one of my transmitter balancers and you find that it won't mount on your transmitter I will gladly refund the purchase price (less original shipping charges fo $3.00) if you return the item postage prepaid.

If you decide you want one they can be purchased at my Website Helicopter John: PRODUCTS: Transmitter Balancer

While you are at my website you are welcome to visit my gallery and view any of the videos that I have posted. I even have one of some of the CNC machining processes that it took to produce this item.

The cost is $20.00 US plus $3.00 Shipping and handling charges

Do you by chance know Peter Spurway in St Albans, Herts U.K.? He is a good friend of mine and also has one of my transmitter balancers. I have sold others to your modeling buddies in the U.K.

Please let me know if I can be of further assistance.

Your Friend,

John Clark

Mick, I owe you this and given he will give a full refund if its not right il get one sent across

[handthrottle]

How is it they dont make the tx stands for the tx's that have 'plastic' handles!!!