Announcement

Collapse
No announcement yet.

OS 50 hyper rear bearings

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    OS 50 hyper rear bearings

    I found some bearings the same spec (supposedly)as the NTN ones I have been using from the local bearing shop.
    I wanted the phenolic cage as in the case of a bearing failure its the metal cage shattering that causes most of the damage (so I'm told - I have replaced mine regularly enough not to experience this yet).

    The bearings have the phenolic cage, but they have one ball less than the NTN one (9 rather than 10). As the bearing gets such a hammering I'm in two minds about these. I've not paid for them yet...

    Opinions invited...
    www.heli-extreme.co.uk a good club in south Sheffield
    600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
    trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
    "450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
    MCPX kbdd tail and blades, miniaviation bats

    Dont spend more flying models than it costs to fly for real
    Tags: None
  • #2
    I run them with the metal cage from local bearing place .. good to upto 30000rpm or 56000rpm depending on what they used in ... A few mates run the same bearings and no issues ... for £5 each they not too bad either ....
    Knight 3D
    http://northeast3d.talkheli.co.uk/
    http://www.lindensflyingclub.co.uk/

    Comment

    Previous template Next
    Working...
    X