Cable ties on the esc

[sacko]

All finished now (minus a few bits I need to get at Elite)

Dont like the gyro wiring at the moment, may see what other solution i can find. Seems stupid that there is nearly a foot of wiring for the gyro and 9257, when there only needs to be a couple of inches.

In the end, I used double sided tape on the esc, then drilled 4 tiny holes to put the cable ties through, and done them up very lightly.

[DIJ]

Looking good Paul

You might want to check the tail blades, as they look reversed.

[sacko]

Ah.. Cheers, need to set it all up, will try and get round to it later on. Was hoping to get out and catch some sun, but it seems to have disappeared

Has anyone got any better solutions for the gyro cables?

[Holst]

I coiled mine up, wrapped a velcro strap around them and shoved them into the fuse between the battery and receiver, then cable tied around the strap so the cable cant get int the way.

The best way will be to buy some servo plug ends and some crimps and cut the cables down. I dont want to do this as I might want to move the gyro to another heli one day.

[sacko]

I thought of cutting cables, but I really dont want to do that at all, may look at spiral wrap. and do something magical with that

[GravityKills]

omg messy gyro cables

[speedy jon]

thats shocking.