Swashplate setup problem

[Guest]

Hi all,

I think I have upset the settings on my DX7 for the T3DS.

Here is a quick video of how it is working at the moment. I took these settings from the back of the manual for the heli - they are specific to the DX7 (Titled Spektrum DX-7 / JR)

I have not touched the pitch or throttle curves as yet but I have been playing with the swash plate mix and expo.

The mix is is:

CH1/Aileron: +75%
CH2/Elevator: -75%
CH6/Pitch: -90%

Servo Reverse:

CH1: N
CH2: N
CH3: R
CH4: R
CH5: N
CH6: R
CH7: na


and here is how it is working:
http://www.cloverleaf4.co.uk/downloa...up_problem.avi

At mid stock on the throttle the swash is level.

I do not think it looks right. If you could shed any light on this I would appreciate it.

Cheers
Jack

[adieuk]

hi jack,
try these settings,

aile +60%
ele +60%
pitch +50%


ch 1 norm
ch 2 norm
ch 3 norm
ch 4 norm
ch 5 norm
ch 6 reverse
ch 7 reverse

hope this helps

[unwind-protect]

I don't think Adie's settings will work.

Use servo reversing to get the servos moving together with collective (so change front servo/ channel 2)

Then use swash mix to get everything moving in the correct direction (so I think change sign of elevator value).

[carpman]

Jack if u cant get it sorted tonite dont worry about it , there be plenty of us tomorrow that will help and show u wot to do......

[adieuk]

sorry jack,
i think unwind-protect is right m8 sorry about my info mate

[Guest]

Cheers guys. I will have a quick try and correct it before coming along tomorrow.