Futaba 9254 problem

[Skydiver]

I have just fitted a GY401 and 9254 to my heli. The Gyro seems to work as required but the servo is glitching all the time. I connected up the old 3001 servo and it works with no problems.

I have set the Gyro to work with the digi servo and have tried routing the wiring differently to no avail, any ideas?

Cheer

[antsis]

Take it back to the shop. One of our members has been having a problem with a 9254 getting really hot. Not sure if there's a dodgy batch of servos on the market.

[Thomas]

That's what the servo does - when you use the 401/digi (9254) combination, the servo is just making tiny adjustments, both of mine do that.

[Mack]

No problem with the servo. The 401 is so good that if you fart near it the servo will move. I have 3 sets of this combo and they all do it.

[Skydiver]

Thanks guys