cx2

[dandeman]

The cx2 that boggy gave me come today. I opened it up and cant wait to try it! But i plugged in the servos, and only the two servos on the back will work. the two motors plug into a 3 in 1 control unit (what ever that is) and two wires come out which have lables marked rudder and throttle, and i have plugged them into the reciver but nothing happens. Can someone please tell me what im doing wrong?

[jboweruk]

First off there are only 2 servos, so that's okay, now we need to establish where you're plugging everything in? And that it's the right way round of course.

Is the Receiver labelled? It has 6 channels but I can't remember from the top of my head what does what, I'm pretty sure channel 1 is where the throttle goes in. Sorry but after that I can't remember, I know channels 5 & 6 aren't used. If in doubt I'll try and have a look tonight for you...

To explain the 3 in 1 it's basically your the speed controller, gyro and battery regulator all in one single unit.

[dandeman]

Ever thing is plugged into the ar6000 rx and i have a dx6. Its all in the right way, but still nothing from the motors...

[Guest]

Is the throttle and trim completely down, is there a solid green light on the 3in1? There is a safety feature which means the motors will not go unless there is about 10s of closed throttle after connecting the battery.

[dandeman]

The throtal is right down (and trim) But the LED on the 3 in 1 is solid red?

[Boggy]

dan is now sorted and flying! he just pm'd me thanks for helping him guys ive just finished work!!!so couldn't reply earlier