Help please

[toetapper]

Hi Guys, this one has me scratching my head.....i am trying to set up my 700,with my 14mz...using a 7ch fasst rx..tranny is set to transmit in 7ch mode..mz manual says channel allocation is as follows
1.throttle
2.rudder
3.gyro
4.aileron
5.elevator
6.pitch
7.gov

Which i have done,buts its all wrong?,can anyone using this system/set up help please.

Cheers
Simon

[raptorheli2]

forget the manual, go into your tx and the channel order will be in there, servo monitor or similar will do. the above is 100% not the correct order for new style receivers. the ccpm is first on new rx's to help with latency/lag.

cheers

[raptorheli2]

if your really stuck i could send you my file from my 14mz and 700 but that is using a 608rx (8ch) so you would need to change the rx type which i think wipes all the settings anyway.

if your stuck i'll dig out my tx for you and tell you the channel order for the 8ch rx. i assume it is the same for the 7 but i don't have one to confirm.

cheers

[toetapper]

Cheers...all sorted, went into servo moniter menu..it tells you channel allocation in there...thanks

Simon