Announcement

Collapse
No announcement yet.

question on channels

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • question on channels

    Hi,

    I've Got a Blade MCX, which is 4 channel (I presume these to be throttle, rotation, tilt sideways and tilt front to back). The Walkera 4#3b has 5 channels. What does the fifth channel do, and is this a good second heli?

    Thanks

  • #2
    4 channel heli - aileron, elevator (cyclics 2 channels), rudder (yaw), throttle (speeds the rotor up and down).

    5 channel heli -aileron, elevator, rudder, throttle, collective pitch. normally the throttle and collective pitch move together with the left unsprung stick movement. They are mixed using the throttle curve and pitch curve to give the desired amount of throttle at the different collective pitch angles.

    6 channel heli - as above but wih a remote adjustable gain on the rudder gyro. This is a feature of all good gyros.

    7 channels - as above but with adjustable set rpm on the governor controlling the head speed.
    This covers all that is necessary for full in 3D flying.

    More channels, in flight mixture control, scale stuff retracts, bomb doors, remote control of pipe and slippers.
    www.heli-extreme.co.uk a good club in south Sheffield
    600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
    trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
    "450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
    MCPX kbdd tail and blades, miniaviation bats

    Dont spend more flying models than it costs to fly for real

    Comment


    • #3
      One question, do you ever use a governor on an electric heli or is it only nitro?
      Many thanks
      Graham
      Blade 400 / DX6i / Phoenix / Blade CX2 / mCX / MSR
      Proud Owner of 2 Eddie Gold stars

      Comment


      • #4
        On the smaller electric helis (up to trex500 size) its not necessary to use a governor. some of the ESC have a governor mode which tries to keep the head speed constant by electrickery without a sensor for feedback. however it actually works pretty well to run the ESC flat out 100% and set the head speed with the pinion size. Electric motors are quite self governing due to the back emf.

        On the larger helis like the trex600 people do sometimes use a separate govenor such as the Aerospire eMultiGov. I beleive the CSM revlock can also be used on electrics.

        But really good 3D performance is possible with just 6 channels, for nitros it is nicer to have 7.
        www.heli-extreme.co.uk a good club in south Sheffield
        600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
        trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
        "450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
        MCPX kbdd tail and blades, miniaviation bats

        Dont spend more flying models than it costs to fly for real

        Comment


        • #5
          Originally posted by moyesboy View Post
          4 channel heli - aileron, elevator (cyclics 2 channels), rudder (yaw), throttle (speeds the rotor up and down).

          5 channel heli -aileron, elevator, rudder, throttle, collective pitch. normally the throttle and collective pitch move together with the left unsprung stick movement. They are mixed using the throttle curve and pitch curve to give the desired amount of throttle at the different collective pitch angles.

          6 channel heli - as above but wih a remote adjustable gain on the rudder gyro. This is a feature of all good gyros.

          7 channels - as above but with adjustable set rpm on the governor controlling the head speed.
          This covers all that is necessary for full in 3D flying.

          More channels, in flight mixture control, scale stuff retracts, bomb doors, remote control of pipe and slippers.
          Thanks. I especially want the remote pipe and slippers!

          Comment

          Working...
          X