T-Rex is very nearly ready. One very small issue to resolve

[Three6ty]

Hi,
The T-rex is virtually finished and all has gone very well. Just got to get all the wires tied up and out of the way...
...When I resolve the only issue left. I have set up the gyro/rudder and is all working. Except the movement on the stick. When I move the rudder stick in either direction, the servo/rudder reaches full reach at half way across the stick movement, so nothing is happening during the second half of stick movement. The servo is not binding in any direction and the rudder goes to it's full limit no probs. I have tried adjusting the gyro travel adjust but still remains the same after setting. Funny thing was it was working this morning.
I am using one of the new Align GP700 gyro and DS620 servo. All other settings seem correct.
Any ideas?
Cheers, Rich

[machasm]

This is quite normal in HH mode.
Have you tried it in rate mode?
Adrian.

[Three6ty]

Hi,
Yes it does it in both modes.
Cheers, Rich

[machasm]

Just checked on mine and it does the same.
I believe this to be normal behaviour.
The Gyro is actually commanding the tail.
When you put some stick in the gyro tells the tail to move.
Since the heli isnt actually moving the gyro tells the tail to move more.
I wouldnt worry about it.
Adrian.

[flatspins]

Yep absoloutly fine.
Will always dothat in HH.

Just make sure you have full movement with no binding and it will be fine.

[Three6ty]

Thanks alot guys. Glad it's all ok. Just got to sort all the wiring tomorrow and all complete. I will post some pics of her completed.
Cheers, Rich

[moonmanflyer]

Nice one Rich, soon be ready for it's first flight then.