If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
a lot of people go to 5cells to try to get better performance from their cheap servos.
this is a false economy. For most 30 and 50 size helis all that is needed is a couple of good reasonably priced digital servos. one on the collective one on the tail.
on non-ccpm machines i find that a single futaba 9252 on the collective and a good combo such as a 401 with 9254 or a 601/9251 are more than capable of dealing with most I can throw at it. 401 just lacks some sharpness and piro consistancy in backwards and fast traveling piros. not a problem for most of pilots.
on a ccpm machine a minimum is some cheap digitals such as futaba 3152 or JR DS811 personally I prefer futaba 9252 but unless you are giving it some serious abuse I doubt you will notice the difference.
all of the above will run on 4cells and all futaba and JR tail specific servos will not enjoy being run on 5cells.
Ade
www.accurc.com adrian@accurc.com
This is an apple free zone
anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.
www.accurc.com adrian@accurc.com
This is an apple free zone
anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.
Comment