Announcement

Collapse
No announcement yet.

tail starting to swing 90 degress left and right

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • tail starting to swing 90 degress left and right

    tail starting to swing 90 degress left and right. the gyro is fine and there is no slope in the tail. I changed the servo and that made no differance. any ideas would be great thanks

  • #2
    is the engine misfiring??

    Comment


    • #3
      hi No the engine is fine thanks

      Comment


      • #4
        is the head speed to low?

        Is the gyro well attached to the heli? - is the pad well stuck down!
        It's all about the size of your chopper...

        Comment


        • #5
          If you are absolutely certain that the gyro and servo are okay then check the mechanics for binding and check any/all bearings for smoothness. If the mechanics are okay then that only leaves the engine and possibly its bearings.
          Member of Mk Heli Club



          GRAMMAR: The difference between knowing your shit and knowing you're shit!

          Comment


          • #6
            The gyro can be fine but if the HH gain is to high it will over compensate and keep on swinging from left to right.
            So ive heard

            Raptor 50 Titan
            OS 50 Hyper
            CY MP5

            Comment


            • #7
              what model,
              engine,
              muffler
              fuel,
              gyro,
              tail servo

              Ade
              www.accurc.com
              adrian@accurc.com
              This is an apple free zone
              anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.

              Comment


              • #8
                was just about to ask all the above Ade ... beat me to it lol ....
                Knight 3D
                http://northeast3d.talkheli.co.uk/
                http://www.lindensflyingclub.co.uk/

                Comment


                • #9
                  hi its the zoom 450ic with the sx 12 engine its one week old. the radio is the futaba 6exhp. the tail servo is a j perkins

                  Comment


                  • #10
                    theres the problem tail servo!!! J Perkins servo's arent the best, my advice is gy401 and 9257

                    Comment


                    • #11
                      Right sorted the tail out i replaced the servo.

                      Comment

                      Working...
                      X