Align 750mx Motor Bullet Connectors Size.

[stargazer]

I recently bought a brand new Align 750mx 530 to fit in a Tdr,the male bullet connectors on the motor wires seem to measure about 5mm Dia on the bit that squashes in to hold it tight in the female connector.It will not go into a 4mm I/Dia female connector and seems to lose in a 5mm female connector,could anyone with this motor measure theres to see what size the female is.

Thanks.

[10x]

Normally they have 4mm terminals fitted, but are very tight to push in the first time...They list 4mm on the 800 and 730 so assume 4mm on the 750....https://www.align-trex.co.uk/electro...-hml80m12.html

[stargazer]

Maybe they are 4mm then,they seemed almost impossible to push into a 4mm connector,I will give it another go.

[stargazer]

You were right 10x,they are 4mm and being new I really had to force them in first time after that they were fine.

Cheers.