Blade grips

[agh321]

Hi all I’m trying to convert robbe Millenium blade grips to suit flybarless
and I need either a m4 x 12mm thread x 12mm ball link
or a
m3x 25mm thread x12mm ball link

or have you any suggestions as to fit ball links onto plastic blade grips

[trillian]

It's a bit of a challenge because the grip arms are made to fit a mixer arm with an m3 bolt. I am doing this as well but for the moment I have a pair of Outrage grips fitted until I find a good way to adapt the Robbe grips. I have converted them as an experiment using a pair of the big ball links that go on the flybar. But I think maybe a more elegant solution would be something like this: https://www.rcworld.co.uk/cgi-bin/sh...2Ehtml#SID=105

You'd just have to then fit some kind of adaptor on the link rod down to a more normal size for a link that fits the swash.

[agh321]

I have 2 pairs of aluminium grips for now that are spot on but Ime wanting to future proof the plastic ones
ive ordered 20 quids worth of linkage balls to try them out

[trillian]

When you get something working let me know what you arrived at. I also have a pair of the ali Robbe grips but I haven't used them yet because apparently they need to be heated for the bearings to fit, I was not able to just push the bearings in.

I have 2 pairs of aluminium grips for now that are spot on but Ime wanting to future proof the plastic ones
ive ordered 20 quids worth of linkage balls to try them out