Announcement

Collapse
No announcement yet.

Where to buy a JLog?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Where to buy a JLog?

    Does anyone know where I can get a Jlog? Are they still being made?
    Synergy E7SE - Spektrum AR7200BX
    Align 600EFL DFC - Spektrum AR7200BX
    Align 450 Pro DFC - 3GX

  • #2
    When I had one I bought it from world of heli. Looks like they have stock too.

    https://world-of-heli.de/en/sender/f...nd-logger.html

    EDIT: I'll add that the S32 is the successor to the Jlog 2.6. If that's what you've been searching for, it's probably why you couldn't find one. S32 does everything Jlog did and more.
    Current fleet: Goblin Thunder Sport (700), Trex 700L, Logo 600, Specter 700, Henseleit TDR, V-Baaa control.
    Next heli: I have pretty much everything I want. Maybe I'll upgrade some electronics or something.

    Comment


    • #3
      Originally posted by bigpops View Post
      When I had one I bought it from world of heli. Looks like they have stock too.

      https://world-of-heli.de/en/sender/f...nd-logger.html

      EDIT: I'll add that the S32 is the successor to the Jlog 2.6. If that's what you've been searching for, it's probably why you couldn't find one. S32 does everything Jlog did and more.

      Purchased - thanks for your help :-)

      It's a shame they went bust from what I've heard. I hope they keep producing it maybe as a hobby rather than business.
      Synergy E7SE - Spektrum AR7200BX
      Align 600EFL DFC - Spektrum AR7200BX
      Align 450 Pro DFC - 3GX

      Comment


      • #4
        Another quick question. How do I wire it up?

        The JLog terminal says connect the signal wire from the castle ESC to pin 1 of terminal 1, then signal wire back to receiver/gyro from pin 2 of terminal 1 and then its ground connection on pin 3 of terminal 1.
        (pin 1 to 3 corresponds to the standard servo wire connector)

        Is that right?

        Every picture I see of an S32 wired up I see two servo connectors; one from the ESC going to terminal 1 and another connector going to the receiver from terminal 4 of the S32.
        Attached Files
        Synergy E7SE - Spektrum AR7200BX
        Align 600EFL DFC - Spektrum AR7200BX
        Align 450 Pro DFC - 3GX

        Comment


        • #5
          I've just found this so it looks like that is correct. If anyone who uses JLog 3 could confirm that would appreciate it.

          Attached Files
          Synergy E7SE - Spektrum AR7200BX
          Align 600EFL DFC - Spektrum AR7200BX
          Align 450 Pro DFC - 3GX

          Comment


          • #6
            I had to make one of those cables myself, as I also used it with Castle on the Jlog 2.6. You're on the right track.
            Current fleet: Goblin Thunder Sport (700), Trex 700L, Logo 600, Specter 700, Henseleit TDR, V-Baaa control.
            Next heli: I have pretty much everything I want. Maybe I'll upgrade some electronics or something.

            Comment


            • #7
              So my JLOG S32 doesn't seem to be doing anything.

              I've programmed the JLOG in the software as in the pictures above.

              Connecting it all together, the JLOG LEDs flash but then no LEDs are lit.

              My castle Talon 90 ESC won't engage.

              Theres no telemetry data coming from the JLOG.

              Any ideas what I'm doing wrong?
              Synergy E7SE - Spektrum AR7200BX
              Align 600EFL DFC - Spektrum AR7200BX
              Align 450 Pro DFC - 3GX

              Comment


              • #8
                Do not know about JLOG, but have you enabled live link in the Talon other menu?....Just a thought...
                Regards Adrian

                I AM SPARTAN V4 + Spirit---TT--RAPTOR-E820 x 2-E755-E700--SYNERGY-E7SE--ALIGN-600PRO

                --... ...-- neXt



                A few bits and bobs & a few electric gizmos to stir the air.

                Comment

                Working...
                X