Programming Kontronik 160hv

[Jotes]

Help please, I went to increase the BEC output but missed the ten beeps. It now shows two green solid LED lights (meaning programming invalid) how do I reset so I can reprogram it.

John...........................................

[Ross Northcott]

put into programme mode and after the 1st beep raise throttle stick and it will do a mode one reset

[Jotes]

Thanks for the reply Ross but I can't get into programming mode. When I recycle every thing the ESC does not respond and the two green lights come on. I need to know how to unlock the ESC so I can get into programming mode.

John........................................

[Ross Northcott]

i thought the kosmik only had 4 beeps? as i use the prog disc to adjust all other settings

[Jotes]

No , the number of beeps corresponds to the mode you wish to adjust. I can not get the kosmik into programming mode. The ESC will not set when you power up.

[Peper]

if the side button is not working, you will need to reset it using prog unit/disc

[Jotes]

Is there anywhere in the UK that sells a prog unit/disc

[Jotes]

Thanks for all your advice guys. I have a 4.8v buffer pack to power up the BD 3sx that I switch on first then connect the main batteries. That normally works. In my frustration I plugged the main batteries in first and the ESC sprung into life so I quickly went into mode 1 and reset. I have no problems now but I do have to connect main batteries before switching on the buffer pack.

Thanks again

John.............................................. .