Replacing Blade with TREX 450

[scoobycolin]

For a number of issue I have decided to replace my Blade 400 with a TREX 450. I see there are various kits available, I just want the one that will do the job. I intend to use the hi-tec servos from my blade, and the 2.4 RX and batteries (of which I have several).

I am planning to get a new Motor and Esc and Gyro. The purpose of this heli is to lob in the car and use as and when I can. My first love is my TREX 600 so I dont care if its not carbon etc.

I'd be grateful for any advice or if anyone has an unused kit they will to sell me then even better :-)

Cheers

[brin]

hi scooby
i've just put together a 450s from fast lad.co.uk and everything went together very well its all setup and ready to fly this weekend hopefully ,im useing the gy401,f925 tail servo,hs-65hb servos,hitec 3amp u-bec,dx6i and 2600 rx it has been setup and test flown and is as steady as a rock as its my first build and i've only flown a bcx2 im a bit nervous but i have to try sometime.
brian

[Andy from Sandy]

If the motor and ESC from the blade is suitable you can get the 450s kit from Skyline for £90
http://www.skylinemodels.co.uk/Links...cat=418&page=1

else £135 with motor and esc, which considering Align charge £70 odd for the motor and ESC when purchased as spares is quite a good deal.