Rescue mode

[cycled]

Hi grumpy , I didn't have rescue delay on mine ( V. 1.3.1) so updated it to V 2 , Still can't find rescue delay , any ideas , kind regards Kenny d

It's there on both versions. Stabi tab: set "function" to "rescue (normal)" (not acro). Now, down the bottom-right, there's a box named "acro delay".

[kenny d]

It's there on both versions. Stabi tab: set "function" to "rescue (normal)" (not acro). Now, down the bottom-right, there's a box named "acro delay".

Got both of my spirits installed & working now , I think I wasn't holding the button long enough for it to right itself, I have reduced the delay to 0.6 , all good now
what a fabulous bit of kit , it gave me the confidence to try pyro flips & rolls , as it happened I didn't need the recovery , this is defiantly going to help me
progress, 1 or 2 saves & its paid for its self , it's a win win situation for me, thanks for all the help guys, kind regards Kenny d

[Scotvar]

Got both of my spirits installed & working now , I think I wasn't holding the button long enough for it to right itself, I have reduced the delay to 0.6 , all good now
what a fabulous bit of kit , it gave me the confidence to try pyro flips & rolls , as it happened I didn't need the recovery , this is defiantly going to help me
progress, 1 or 2 saves & its payed for its self , it's a win win situation for me, thanks for all the help guys, kind regards Kenny d

Glad to hear it Kenny. Like has been said before, you'll probably find more often than not you won't need to use it but it just gives you that safety net feeling which will give you the confidence to try new moves. Make sure you practice using it though so it becomes second nature when things go wrong because any delay can and will be costly!

Enjoy it mate.

Paul

[kenny d]

I've updated my second unit to v2 , now there is no power to the motor , the esc doesn't seem to power up ( no tones)
I tried the transmitter settings from the one that is still working & it still didn't work so I don't think the problem is transmitter related
any help is much appreciated ,regards Kenny d

[Grumpy]

The throttle calibration changed at V2.0 so you probably will have to re-calibrate the throttle range to get the ESC to arm.

(I'm assuming the servos are responding)

[kenny d]

Yes all servos responding, I'll try to rre-callibrate the throttle now , thanks Kd