Align gov sensor on HV?

[tonystevens]

Before i went HV i had split the power off the gov sensor to the powerbus side of my vbar so it saw 6v and since switching to HV i haven't changed it back to the normal sensor port so its now getting full 2s voltage.
Could this have damaged the sensor at all or will it work fine at 7.4v?

[jwatts007]

I am using one on my 600 HV and it is fine...

[George J]

My two Align sensors are working perfectly straight into the sensor port T, not needed to split the power on them personally. Should be fine on HV though.