BPS-1 BackPlate Sensor Adhesive

[Planehazza]

Hi all,

The manual for the Futaba BPS-1 backplate sensor states that a silicon adhesive is required. Any recommendations as I'm assuming a heat resistant one will be necessary?

It's for the CGY750 RPM sensor and it's going into an OS-105HZ-R
Cheers!

[ROSSCO]

Hi Harry,

Any high temp RTV silicone should do the trick, the CSM RTV used for the carb smart sensors is what i have used and does the job.
CSM RTV Silicone 75Ml CSM0053

Hope this helps,
Cheers,
Ross

[Planehazza]

RTV is what I read elsewhere, but I thought it was some american automotive product. I'll get some ordered