Announcement

Collapse
No announcement yet.

Whats up with my trex450

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Whats up with my trex450

    strange really...post crash flights just spooling up...rotors sound like they are powered by an engine thats missing when at mid stick. tail coming round a little as its spooling up...give it a little rudder either way and the head speed ramps up (revs)...stutters a bit, rudder again and up goes the head speed...all this while at mid stick just before lift off...

    im lost for ideas...help.
    Trex700e, V bar v5 pro,
    Trex450v2
    Trex 600esp....scorpion motor and 8s setup...hold tight....

  • #2
    no one got any ideas....you guys have allways got ideas (usually).

    i myself being a lesser mortal in this situation have literally no ideas.?
    Trex700e, V bar v5 pro,
    Trex450v2
    Trex 600esp....scorpion motor and 8s setup...hold tight....

    Comment


    • #3
      I would re-program the esc mate, Try again then look further if its still not working right.

      Have you checked the connectors from the motor to the esc and lipo connectors, Sounds like somethings not making contact properly.

      Comment


      • #4
        check connections and all seems okay. though during re-build i did disconnect one the the 3 motor wires for a point..maybe that was not back in quite right...anyway all fully home now,,speed controller beeping like it should etc...will try spinning it up tommorow now.

        thanks.
        Trex700e, V bar v5 pro,
        Trex450v2
        Trex 600esp....scorpion motor and 8s setup...hold tight....

        Comment


        • #5
          Did you check the main and tail drive gears for missing teeth ?, and also check the belt. . . . . also check the mesh of the drive gear and the main gear.
          Janek

          Why does it always persist down at weekends ?

          Comment

          Working...
          X