3gx or Servo Problem

[PaulCo]

Hello All,

My lad changed the cyclic servos on his 450x from Hitec 5065 mg (which he was never completely happy with, especially when he had one burn out) to Savox 0257, tail servo is an Align 425m which has always been fine. Anyway first flight with the new setup tonight ran great, second flight and the tail servo is pulling to its right, safely got to ground and the tail slider is twitching away merrily.
Would you suggest its servo problem (its not very old) or 3gx, he has always seemed very adapt at seting up his 3gx.

Thanks for any help.

[tomatwalden]

EDIT : Scrap that, just realised you haven't changed the tail servo.

[RcRotaryMadness]

if its twitching then:

1) just check the setting is correct in the 3GX (Again don't ask me how to change the settings as I don't know)
2) if setting is correct then its more than likely a damaged/faulty servo.. if he has a spare tail servo just try plugging it in to see if it jitters or not to confirm.

Also will send you a pm about the Hitec 5065 mg =)

Cheers
Matt