Announcement

Collapse
No announcement yet.

weather

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • weather

    despite the snow ans sleet thismorning I still made arrangements to go fly after work.
    wind is light but it was raining on and off all day.
    Just now the sun came out, so fingers crossed I will get some flying in...
    www.heli-extreme.co.uk a good club in south Sheffield
    600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
    trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
    "450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
    MCPX kbdd tail and blades, miniaviation bats

    Dont spend more flying models than it costs to fly for real

  • #2
    I hope to get out for a few tanks before dark this evening too
    Rain etc earlier...
    Currently looking ok to fly!

    Cheers,
    Rob
    Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

    | 3D Championship

    Comment


    • #3
      It's stunning down here in Somerset!

      Had three tanks at lunchtime and i'm waiting for moonmanflyer and Adie smith to come over for some more action tonight!!

      Looking forward to seeing Adie fly for the first time as he is well known to be S***t hot!

      will let you know how we get on later
      PROUD OWNER OF 4 EDDIE GOLD STARS!!!!!!

      Comment


      • #4
        Well am on nights so thought i wud get out for a bit ... me and rotorhead went for a flight as it was nice ... till it started to pee it down lol .... got some vid of it tho .. just sorting it out now for sharing hehe
        Knight 3D
        http://northeast3d.talkheli.co.uk/
        http://www.lindensflyingclub.co.uk/

        Comment


        • #5
          ...and now it's raining again, and huge grey crud stretching as far as I can see

          Dammit!

          Cheers,
          Rob
          Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

          | 3D Championship

          Comment


          • #6
            Originally posted by robgt View Post
            ...and now it's raining again, and huge grey crud stretching as far as I can see

            Dammit!

            Cheers,
            Rob
            In that case get back to sunny Yorkshire..

            2 packs down, Another going in the 500 as I type..

            Comment


            • #7
              LOL
              I think by the time I could get up there it would be quite a bit past dark
              Enjoy your flying matey!

              Cheers,
              Rob
              Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

              | 3D Championship

              Comment


              • #8
                Originally posted by robgt View Post
                LOL
                I think by the time I could get up there it would be quite a bit past dark
                Enjoy your flying matey!

                Cheers,
                Rob
                At this moment in time not a breath of wind and perfect.

                3 packs done..

                Comment


                • #9
                  Going to go sit in my car at the field - try to grab a flight or two between showers...
                  LOL
                  Cheers,
                  Rob
                  Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

                  | 3D Championship

                  Comment


                  • #10
                    its loverly here but the chance of getting to the field tonight before dark is very slim
                    All the best
                    Tony.
                    Thunder Tiger E700 - Align 700N - Fusion 50 - Align 600N


                    Comment


                    • #11
                      Well I got 4 packs through the EP200 messing around with it, I was toying with the idea of sticking the rappy in the car and heading down to the field, wish I had now!
                      Regards,

                      Jason
                      Futaba 12FG/ Knight 3D / 450Pro / Beam E4 and a whole load of gliders!

                      Comment


                      • #12
                        Managed a single flight before rain stopped play this evening...
                        Ho hum
                        Cheers,
                        Rob
                        Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

                        | 3D Championship

                        Comment


                        • #13
                          ran four packs through the Mini T this evening, fantastic weather here in hampshire today, and the hover practise was well needed!!
                          JAMIE,

                          -Mini Titan e325-
                          Sonix cnc head & tail rotor
                          GY401 & HDS 577 servo
                          HS65mg's
                          CY radix blades
                          scorpion hk2221-8 motor & 55a esc
                          Spektrum DX7-goodbye glitches

                          Comment


                          • #14
                            A lovely evening. cold and lonely though.
                            2 tanks through the raptor, and its flying sweet now.
                            3 tanks through the 600n
                            3 packs through the 450.

                            Keeping the packs warm in your pocket really works.

                            I was just getting comfortable and less nervous when it went dark. Ive been neglecting the sim I think!
                            www.heli-extreme.co.uk a good club in south Sheffield
                            600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
                            trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
                            "450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
                            MCPX kbdd tail and blades, miniaviation bats

                            Dont spend more flying models than it costs to fly for real

                            Comment


                            • #15
                              We had a great evening flying! Adie, stu and James went nuts with their 600's and 500's.

                              I am getting some nice fast clean circuits in now. I'm on idle up for the first time today and it feels much better, more locked in and responsive.

                              I only started flying last week and i'm getting the most amazing buzz out of every flight! my knees have stopped shaking but the nerves and the cold are still spazzing out my fingers a bit!!!!

                              Happy days!!
                              PROUD OWNER OF 4 EDDIE GOLD STARS!!!!!!

                              Comment

                              Working...
                              X