GAUI X3 Embedded X3 circuit Frame

[SGD]

EMBEDDED GAUI X3 circuit board frame, reduce the complication wiring, easy for installation, low cost. Best choice in practicing 3D aerobatics. Designed with two gyro mounting locations.

Flying Hobby Sharing » GAUI X3 Embedded X3 circuit Frame

Neat idea but I wonder if it will catch on as it adds two more connections per circuit that could cause problems.

24_n.jpg 611_n.jpg

[gazmk2]

Multirotors have had this for years with a power distribution PCB built into the frame. TBS use something similar on the Discovery quacopter for neatening up the cabling for the FPV system.

[Boggy]

First thing I thought was. expensive crashes!

[milly0812]

First thing I thought was. expensive crashes!

I thought the same Ron but my old 450 pro has had more repairs than Katie Price but I've never manage to break them frames. It's a proper triggers broom but still has the same frame set from new

[waveydavey]

I thought the same Ron but my old 450 pro has had more repairs than Katie Price but I've never manage to break them frames. It's a proper triggers broom but still has the same frame set from new

Same as my 600 Don, a nice idea though all the same.

[Boggy]

True Don. I suppose any crash that breaks a frame is a biggy anyway

[Peper]

they look like Glass fibre frames?
surely rigid enough and light on this bird, but with the standard setup (exept the ESC) the servos wires bundle up nicely if the FBL unit is set on the tail boom top plate
this would be nice on larger birds where servo extensions are a must

good idea IMO and I am seeing a servo wire crimping tool on my shopping basket very soon

[Jez N]

It's a fairly easy build anyway and burying the wiring is pretty simple given the servo layout. A pair of servo crimpers to shorten the wires would be the best advice tbh as the travel from servo to FBL is very short.