Rave 90 env + vbar

[Blade-slapper]

Does anyone out their know how well vbar works on a rave 90 env. Thanks.

[milly0812]

Mine flew just great with minivbar. Iirc you have a choice of 120 and 140 degrees swashplates just make sure you run the correct geometry in the software

[George J]

Got vbar on all my Raves and they work perfectly although you need to change the ball spacing on the servos to get good a good set up, Quickuk small servo wheels are good for this. You also need a shorter ball on the swash plate that's connected to the pitch link going up to the blade grip, also from Quickuk, 3-4mm if I remember. You will also need the plastic links to go with the Quickuk balls which I think come in 2mm thread, you'll need to drill this out to 2.5mm I think.
As standard there is to much pitch at the head so you'd end up with low numbers in the vbar, doing the above sorts that out completely, 120 degree swash for me on all mine.

[Blade-slapper]

Which did you run don?