Trex 550 dfc pro

[paulspassat]

Hi has enyone got the new trex 550 pro dfc if so can I ask wot head speed u tuning in gov mode as I've just set up gov and it's saying 2300 is that right or do I have so think not set right thanks


Sent from my iPhone using my hands

[RC Geeky]

Running my 550DFC non Pro at 2350 with a 12T pinion in Governor mode, with the pro you could probably up that slightly.

Hi has enyone got the new trex 550 pro dfc if so can I ask wot head speed u tuning in gov mode as I've just set up gov and it's saying 2300 is that right or do I have so think not set right thanks


Sent from my iPhone using my hands

[PorscheBoy]

On my 550e DFC V3, I run at 1990 in normal and 2230 in IU 1.

Accidentally due to new gearing and a wrongly set jive I did run at approaching 2700 and it was ballistic to the point of stupid. I am happy at 2230 but 2300 would be OK, slightly less flight time I guess though. I am not a hard 3D flyer.

[paulspassat]

Hi mate is that with a 16 piñon and the 730mx motor if so that's sound mate as I don't do 3d only sport


Sent from my iPhone using my hands

[PorscheBoy]

112t main and 11t pinion using a Kontronic Jive 100+. This is on the v3 (600 size boom) 550e DFC v3. You said you have the new one (RH55E06XW), which I believe they have put a larger motor in yours, so a 112T main gear and 16t pinion, but I would have thought you could still run at the same HS as blades etc are the same. To be honest set up as per instructions (2300?) see how you feel, but I would bet you could drop down and not really notice the difference and gain some flight time. The heli will fly happily from 1850 to 2700, it's about what you want out of it.