Tweet
This is a bit weird, had little landing crash (screw came out of flybar bearing) nothing serious, blades and tail boom bent, replaced the damaged bits and tried a test hover, soon as it spooled up the tail just spun! checked the Gyro and it was working in reverse! so reset to normal and it worked ok again but now the transmiter rudder is reversed, so switch the rudder control and it's ok now, I can't work out how the Gyro went reverse from a tinny crash?
-
-
Put tail servo horn on the other side ???sigpic
Rave ENV Nitro
New Logo 550
Synergy N5c
TSA 700E night flier
I use VBar control because it's feckin awesome I use NEO rescue when I remember to
5 x EGS thingys and a Platinum star doo dah -
No I fixed the problem but wanted to know why the Gyro reversed itself?Comment
-
The symptoms you describe as in gyro reversed and had to reverse servo are indicative of putting the servo or the horn back on the wrong way. If you are certain it all went back on the same then I'm as puzzled as you
sigpic
Rave ENV Nitro
New Logo 550
Synergy N5c
TSA 700E night flier
I use VBar control because it's feckin awesome I use NEO rescue when I remember to
5 x EGS thingys and a Platinum star doo dahComment
-
Hello Cabbie10 You have not mentioned what heli you have, If it is belt drive tail you may have turned the belt so the tail is going the wrong way.....Regards Adrian
I AM SPARTAN V4 + Spirit---TT--RAPTOR-E820 x 2-E755-E700--SYNERGY-E7SE--ALIGN-600PRO
--... ...-- neXt
A few bits and bobs & a few electric gizmos to stir the air.
Comment
-
Well done 10x, spot on, won't do that again!
Comment
Comment