Rudder servo issue please help!!!!!

[Md001]

Hello guys, I am desperately in need of some advice.

I just received my new rudder servo....and looks like my old servo was not messed up it was actually fine since both of them doing same sort of movement...now I wonder where am I doing it wrong.

when the servo is fitted to the Spartan quark gyro lead the there is a lot movement in the clockwise direction and little in the anti clockwise direction....its not centred.... any reason why its not being centred????

please some advice with be great help.

thanks.
md

[400blade]

have you calibrated it and set the end points

[tomatwalden]

When you say no movement anticlockwise, is that with the servo on the bench or in the heli and connected to the tail?


Sent from my iPad using Tapatalk - now Free

[trillian]

It sounds like the endpoints have not been set (if you're moving the stick and it is definitely moving more in one direction than the other). The endpoints are a separate issue to whether it is centred or not because on the Quark the travel is adjustable in each direction.

[tomatwalden]

Probably worth checking the monitor screen on the transmitter too, and make sure it's not a problem with the TX.


Sent from my iPad using Tapatalk - now Free

[Md001]

no did not calibrate it...since the servo is not centred and travelling in one direction too much,...I thought you set servo 1st and then calibrate.

[Md001]

connected to the heli......connected to the lead that comes with the quark gyro.

When you say no movement anticlockwise, is that with the servo on the bench or in the heli and connected to the tail?


Sent from my iPad using Tapatalk - now Free

[Md001]

ok guys I set my subtrim-0..........main trim on the radio-0.......................and travel adjustment rudder to 0............................now what should I do!!!!

[Md001]

can anyone please give me a set of instruction on how to make the servo travel equal direction in both sides from the travel adjust setting on the dx6i.

[400blade]

if you can wait till later il get a copy off my mate failing that Programming the Spartan Quark Gyro - YouTube
Spartan Quark MEMS Gyro Setup - Chris Reibert - YouTube

[Md001]

Thanks guys for all your help...being a total noob i was unable to hack the rudder servo set up...but luckily a fellow flyer offered me to set the heli up tomorrow so planning to visit him n get it sorted....will keep you guys posted.