22mm Metal or PA6 boom clamps Uk supplier wanted

[Mslater]

I'm looking for a uk supplier of 22mm boom clamps, I can find plenty abroad eg Boom block for 22mm tube [OMG]SECONDARY_SECTION$2.86PRIMARY_SECTIONTITLETERTIARY _SECTIONSITE_TAGLINE

Anyone got a uk supplier ?

[ady]

I'm looking for a uk supplier of 22mm boom clamps, I can find plenty abroad eg Boom block for 22mm tube [OMG]SECONDARY_SECTION$2.86PRIMARY_SECTIONTITLETERTIARY _SECTIONSITE_TAGLINE

Anyone got a uk supplier ?

Are these any use , MIK4718 | Clamp for horizontal fin Dia 22mm - LOGO 550 SX (2)

[Mslater]

Are these any use , MIK4718 | Clamp for horizontal fin Dia 22mm - LOGO 550 SX (2)

Close, they need to be flat at the top and bottom

[kroozing]

I have litterally just ordered some aluminium flat bar to make my own 19mm ones as i couldn't find any for less than a tenner each.
The aluminium is 2m long so i will be able to spare you some if you wanna have a go. Simply cut a square, drill 22mm hole in the center then cut in half.


Just seen these on fast lads 22MM Tube Clamp/ Metal TL8002

[ady]

One side of these are flat , maybe buy two to make your one ?
Evolution RC,Rockamp,Kokam,Align,Beam,Rave,Wera,Synergy,ElyQ ,Scorpion,Spartan,Rapicon,Beastx, Spin Blades> Home > Rc Helicopter Spares > Compass Model > ALL COMPASS SPARES > 02-0824S Horizon fin holder (Metal)

not sure if they are 22mm tho ?

[Mslater]

I need 32 of them to start with. I can machine the block with our CNC but drilling the holes is a problem.

or I can laser cut 5mm Ali plate to size but again the holes are a problem.

[kroozing]

I planned on using a pillar drill at work then tapping one half. The aluminium bar I bought is 6mm thick and 25mm wide which will give enough room to make out drill centres and punch them for 19mm ones. I can take pictures when it arrives of the finished ones.