Elevator servo unplug in flight

[stunks]

After setting up my mates heli after he crash it a few weeks ago! He Took it out today and all was ok during the test hover, but as soon as he decided to fly it! It went crazy and he put it in, frustrating because we all was puzzled as to why it went in.
After the investigation we discover that the servo wire was in was un plug. It's the usual crash blades,boom etc so he's looking at £150-200

[milly0812]

Elevator servo unplug in flight

These are much cheaper

http://m.tesco.com/mt/www.tesco.com/...FVMetAodxjMAgg

[RcRotaryMadness]

Yeah bad luck mate - as said though you need to secure all plugs with glue or whatever - the plugs will come loose with all the vibes etc.

[Jamin_00]

The Americans always go on about Shoe Goo and I can never find but James had some at the field and if James has it then it came from Fast Lads I suspect.

[KnifeEdge]

Yes, here u go..

http://www.fast-lad.co.uk/store/adva...4&x=-895&y=-18

[Snaaakeey]

Elevator servo unplug in flight

This stuff is fantastic. Bit like silicon and u can wet your finger and get a great smooth finish, sets in 1-2min. Get an edge started and the hole lot will peel away from the top of your servo plug set in one clean lump!

ImageUploadedByTapatalk1376254197.053816.jpg

[waveydavey]

Zap goo for me too, good for doing the cores as they enter the plug on your speccy sats too