Ar7200bx tail bounce help??

[Goshawk]

when you put small amount in on rudder in it moves/bounces when you stop, it repeats this when in the air too, I haven't altered anything in my dx8. I'm I right in saying it just rudder just plugs strait into ar7200bx and you alter the gain in the fbl system?

regards
simon

video wouldn't work

[GIXERMAN]

alter gain in tx, if its wagging adjust gain should be ok. you can adjust pot on be for tail dynamics I believe I normally start at 40 and work up

[Goshawk]

alter gain in tx, if its wagging adjust gain should be ok. you can adjust pot on be for tail dynamics I believe I normally start at 40 and work up

Haha carnt get video up 10sec vid on iPad won't upload, cheers Brian do you you how to upload video for future reference??

[waveydavey]

Wheres the video?

You are correct, alter gain in the Tx, channel 5 wherever you have that setup too. First make sure your piro speed is the same left and right, adjust the endpoints to make them the same and at the speed you want. The adjust the tail rod so that you get the same bounce either side, making sure to redo your tail limits each time. When you're happy with that fly backwards or tail slides backwards hurricanes or loops to really push the tail and adjust your gain to start the tail wagging, then back off 1 or 2 points to stop wagging. When you're happy with that then adjust pot 3 to crispen up or soften the stops. You can also piro in ff and adjust the headinghold gain, this will help with piro consistency, make sure that mechanically that your tail mechanism is nice and smooth in operation.

You can also add a bit of pre comp to the tail using the parameter menu.

[GIXERMAN]

Haha carnt get video up 10sec vid on iPad won't upload, cheers Brian do you you how to upload video for future reference??

never done on my ipad mini only photos. pm me your email will facetime you if you want

[Goshawk]

I'm lost how do you do gain in tx when all I have is rudder plugged in?? I thick as f**k with electrics,

[waveydavey]

Channel 5 is linked internally, just set channel 5 up as gyro and adjustas above, what heli is it. If it's a 6 or 700 start with the gain around 32

[GIXERMAN]

wavey, its a 600e pro, just been threw it with him over facetime

[Goshawk]

Thankyou Brian the powers of technology, see what tomorrow brings, thanks again Brian

[GIXERMAN]

no problem enjoy Anytime