Crash repairs

[carpman]

Right every1 i crashed the B400 nothing major but can any1 tell me where i can find out how to strip to down my B400 and while i'm ordering new parts....

What is the best tail servo ?

Is here any other upgrades i should think about ?

[Boggy]

hitec hs56hb works well (£17)
stock up on feathering shafts and blade grips these seem the weekest parts.

there is no definitive strip down guide you just need to be methodical and keep every thing in order. take photo's as you go as a guide!

[flatspins]

Futaba 3153 servo(£20) hold the tail superbly.
Mount the ball 7mm from the centre of the arm and set the gyro to DS and all will be well

The exploded diagram in the manual should be your first stop on how to strip it down.
Just remove 1 piece at a time(take photos with your phone if it helps).
There are alot of small pieces on it so a bowl or small pot will stop you from losing them.
It`s not as hard as it looks.

Good luck.

[carpman]

FS just had a look for the suggested servos found hs65 but no 3153 is the spectrum dsp60 any good as it suggested by eflite in manual

whilst googling around about said problem i found this which i think is great for any1 that has this problem http://www.blade400repair.com/index.html

oh yeah Boggy i have sorted the expo out just got to get extra weight
Aile and Ele now set at 80% - 20% i read this else where