Swash plate problem on Belt CP

[VaNDAL_UK]

Hi

I have a Belt CP all sock except Hitech 55 servos. My problem is when I push the throttle up the swash plate moves down which gives me negative pitch so its pushing the heli into the ground.

I have reversed the throttle in the tx but that will give me FULL throttle but the swash moves correctly. I think I'm going mad I can figure out why this is happening

I have no idea how to sort this. Any help would be great!

[heliward0]

need to do it in your swash settings in the tx.. you need to adjust from 60 to -60 or visa- versa.. hope this helps
what radio you got??

[VaNDAL_UK]

I should mention i have the stock Esky TX 0406a it doesn't have any setting at all.

[heliward0]

oh er dunno then mate... i assume you have just swoped over to the hs-55 servos then??

[Dashik]

If I recall it may be that the Hitec servos move the opposite way to the standard E-Sky ones. Equally I may just be talking bollocks.....

Try testing with one of your old servos and see if it moves the same way as a Hitec one. Oh and disconect the motor first!

[heliward0]

yea thats what i was thinking matey....

[Boggy]

if it has no other settings surely just reverse elv/aerl/pitch channels not the throttle!

[VaNDAL_UK]

if it has no other settings surely just reverse elv/aerl/pitch channels not the throttle!

Good thought but there is no option to reverse the pitch

If I recall it may be that the Hitec servos move the opposite way to the standard E-Sky ones. Equally I may just be talking bollocks.....

Try testing with one of your old servos and see if it moves the same way as a Hitec one. Oh and disconect the motor first!

This sounds like a plan I'll try it now!

Thanks guys I'll let you know the out come in a few mins

[Boggy]

are you sure look at the rx and see if the third servo is pluged into a channel called aux ...or somthing!! channel 6

[Boggy]

if its this rx reverse channel 2 / 3 and 6 if thats where its plugged

http://www.buzzflyer.co.uk/product.asp?P_ID=194

[VaNDAL_UK]

OK ..... Dashik was right the hitec servos do move in reverse to the esky servos!!!!!!!!!...

I just tryed reversing the + & - on the Hitec servo plug to see if the would make it move the same but no go!! ... O well looks like the guy who I bought it off had this problem, couldn't figure it out and sold the whole lot to me for £100

Luckley I have 4 BNIB esky servos.

Thanks guys!!!

[Boggy]

just been looking at the manual on line that is one wierd setup!!

[VaNDAL_UK]

Certinly is.

Anyways Im putting her back together now allong with the esky servos

Should have her flying in 45 mins

[Boggy]

good man the translation on that manual dosent help!!

place the battery in the breezy place when charging

[Dashik]

OK ..... Dashik was right

Damn!!! Really?