(HELP)Kyosho Blade Balancer Instructions

[RaptorBaron]

Hi,
Just bought a Raptor 50 V.2, included was a Kyosho Deluxe Blade Balancer,
but there are no instruction with it. I have researched the web but can't find any sites that I can download from, has anyone got these instructions that they can scan & email me a copy, please

[SRH990]

The way I use mine is to sit the blade on the 'L' shaped arms and move it until the balancer is level, then mark the part of the blade under the pointer, this is the centre of gravity. Repeat this for the other blade then check to see that the C of G is the same on both blades, if it isn't then they're not very good blades! You can add weight to the tip of one of the blades until the C of G's match.

After this, mount the blades under the knurled aluminium fixings and pull the blades out straight. When the balance stops swinging, if one blade is lower than the other, add weight to the C of G you previously marked on the higher blade until the balance is level, when you've reached this point the blades should be matched for C of G and weight and will be ready for use.