Tweet
Is the red wire always in the middle on the servo plug of a buffer pack to power a rx?
Sent from my iFonzie
using Tapatalk
Sent from my iFonzie
using Tapatalk
-
Mikado Logo 600 3D
Evergreen Raptor 50 now R.I.P.
Align T-rex 450 V2 gt5 fbl soon controlled by Ardupilot Mega 2.5
Trex 600 nitro
Hitec Aurora 9
PL8 supported by Grant PSU aka "The Black BOX" -
Yes red is always in the middle
Avant mostro 700E
Avant mostro 700 Nitro
member of :
South cheshire heliaddicts -
It's so you don't fry your Electrics if you plug in the wrong way.
Sent from my GT-I9100 using TapatalkRaptor 50 v2, trex 600n fbl, trex 550 v2 3gx, trex 450 3gx v2, mini-titan v1, mcpx v1, WoT4 foamE, Gootch 450, mcpx bl.Comment
-
With the servo plug in your left hand with the barbs upright, signal to the left, red in the middle and black/brown to the rightComment
-
I just fried my rx because my pack has two pin plug no 3
Sent from my iFonzie
using TapatalkMikado Logo 600 3D
Evergreen Raptor 50 now R.I.P.
Align T-rex 450 V2 gt5 fbl soon controlled by Ardupilot Mega 2.5
Trex 600 nitro
Hitec Aurora 9
PL8 supported by Grant PSU aka "The Black BOX"Comment
-
That's a first I thought all servo leads were standard 3 pin. Why is your battery plugged straight into rx no speed controller bec or voltage reg?
Sent from my GT-I9100 using TapatalkRaptor 50 v2, trex 600n fbl, trex 550 v2 3gx, trex 450 3gx v2, mini-titan v1, mcpx v1, WoT4 foamE, Gootch 450, mcpx bl.Comment
-
-
Mikado Logo 600 3D
Evergreen Raptor 50 now R.I.P.
Align T-rex 450 V2 gt5 fbl soon controlled by Ardupilot Mega 2.5
Trex 600 nitro
Hitec Aurora 9
PL8 supported by Grant PSU aka "The Black BOX"Comment
-
Mikado Logo 600 3D
Evergreen Raptor 50 now R.I.P.
Align T-rex 450 V2 gt5 fbl soon controlled by Ardupilot Mega 2.5
Trex 600 nitro
Hitec Aurora 9
PL8 supported by Grant PSU aka "The Black BOX"Comment
-
Oh dear ! It'll be a bit smelly in your house then !
sigpic Trex 700 OS91,Vbar,S9254,DS610,NHP
Trex600LE, OS50,Vbar,LTG6100,DS610X4,NHP
Raptor 30V1 Maverick Head
OctoCopter
Futaba 14SG
Guinness World Record Pilot 2011/12
Comment
-
No smell, no smoke, just dead no lights no more
Sent from my iFonzie
using TapatalkMikado Logo 600 3D
Evergreen Raptor 50 now R.I.P.
Align T-rex 450 V2 gt5 fbl soon controlled by Ardupilot Mega 2.5
Trex 600 nitro
Hitec Aurora 9
PL8 supported by Grant PSU aka "The Black BOX"Comment
-
That looks like a JST, not servo connector. Are you sure it's fried, they normally don't do anything with the power in wrong wayComment
-
It doesn't power up anymore, I tried a different pack but nothingOriginally posted by waveydavey View Post
Sent from my iFonzie
using TapatalkMikado Logo 600 3D
Evergreen Raptor 50 now R.I.P.
Align T-rex 450 V2 gt5 fbl soon controlled by Ardupilot Mega 2.5
Trex 600 nitro
Hitec Aurora 9
PL8 supported by Grant PSU aka "The Black BOX"Comment
-
Btw how many volts in that pack? You need the proper servo connections in the rx. Why did you do it this way
Sent from my GT-I9100 using TapatalkRaptor 50 v2, trex 600n fbl, trex 550 v2 3gx, trex 450 3gx v2, mini-titan v1, mcpx v1, WoT4 foamE, Gootch 450, mcpx bl.Comment
-
are 4x1,2v nica battery, i was bind the rxOriginally posted by NoFixedAbode View PostBtw how many volts in that pack? You need the proper servo connections in the rx. Why did you do it this way
Sent from my GT-I9100 using TapatalkMikado Logo 600 3D
Evergreen Raptor 50 now R.I.P.
Align T-rex 450 V2 gt5 fbl soon controlled by Ardupilot Mega 2.5
Trex 600 nitro
Hitec Aurora 9
PL8 supported by Grant PSU aka "The Black BOX"Comment
Comment