Cyclic set up on Mini Titan

[Bunter]

Hi folks

I spun up my MT in the garden tonight and I think I have the cyclic servos all wrong. Could someone please check that I have got this right? This is what the swash should do for the following stick inputs:

left aileron input - swash should drop on the left

right aileron input - swash should rise on the left

back elevator - swash should drop at the back

forward elevator - swash should rise at the back

If the above is correct then I have the elevator correct but aileron wrong.

Thanks as always

Bill

[robgt]

Yes, those movements are correct, although I usually say which way an input tips the swash down...

Left aileron - swash tips left
Right aileron - swash tips right
Forward elevator - swash tips forward
Back elevator - swash tips back

If one of them is working the wrong way, go into your swash menu on your TX and change the % value from positive to negative (or vice-versa).

Cheers,
Rob

[Fixxxer]

The diffrence with the titan if i remember rightly is that the swash moves down to give positive pitch and up to give negative where most other models are the other way around.

[Bunter]

Yes, those movements are correct, although I usually say which way an input tips the swash down...

Left aileron - swash tips left
Right aileron - swash tips right
Forward elevator - swash tips forward
Back elevator - swash tips back

If one of them is working the wrong way, go into your swash menu on your TX and change the % value from positive to negative (or vice-versa).

Cheers,
Rob

Thanks Rob. Think I've got it right now.

Cheers

Bill

[Bunter]

The diffrence with the titan if i remember rightly is that the swash moves down to give positive pitch and up to give negative where most other models are the other way around.

Yes that is right, it's because the blade grips are leading edge control rather than trailing edge control.

Bill