Mini Pred problems

[Crashed again]

Hi ya all

Newbie here i am having lots of problems with the above mentioned. To explain it just spins for england i have adjusted and re adjusted the tail g/box rotors etc moved the tail servo up and down the boom. So just before i throw it in the wheelie bin can anybody please point me in the right direction. I have had it hovering to a fashion but loose it and start re-adjusting again. Or have i spent 180 pounds on load of crap ?

Thanks

Mark.

[Dashik]

It sounds like you have the servo or gyro sense the wrong way, but make sure you get some more advice before you follow mine. Also look for Finless vids on the net to see how to set the tail up.

Regards

James

[zx6rjey]

check your Gyro is working chap, i had simalar problems with mine, i took the gyro apart and found some rather shoddy soldering work, along with a couple of broken joints (this was after a crash), put it all back together and other than one or 2 stability problems it hovers again.

Mark

[heliward0]

It sounds like you have the servo or gyro sense the wrong way !! yea i agree with this mate..

[Crashed again]

Hi

Thanks for your replys gyro is set to norm and the servo seems to be working corectley IE back and forth as normal. Will take a peek inside the gyro and report back.

Regards,

Mark.

[Crashed again]

Hi

I have checked the gyro and cannot see any problem i think it is just down to my set up, I am talking to Andy at Century where they are made hope he can help. I have spent hrs trying to stop it spinning i have just leveled it only by hold ing the left stick 3/4 over.