If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Gotta start somewhere!!!! Not a fan of the TT 50 being an os man myself but I am sure it'll do for a beginner....Would be ideal if you could get someone to have a shuffty over it as you might just be getting a bag of bolts!!!
The difference between a raptor 50v2 and a titan is negligable, and not all the changes are improvements anyhow. This is why the raptor is falling a bit out of favour. If the v3 had been a reduced weight ccpm heli then the new helis would be still in its shadow...
Anyway nowt wrong with a raptor, lots of readily avialable cheap spares and plenty of folks who know how to fly them and set them up.
The electrics and motor are not the best in this one - adequate and not up to 3D flying. for that you probably need to upgrade the gyro and tail servo and at least the collective pitch servo. The extra air frame makes it interesting, but note that all the commonly broken bits are already broken so to make use of it as spares means a big smash!
These helis are hard to find cheap on ebay, they often go for a bit much. The ones with good electrics etc don't necessarily fetch much more as the buyers don't know what they are looking at - so look for one with digital servos and a good gyro and that is where you will find better value.
Look up thr new prices of all the servos etc before you buy.
www.heli-extreme.co.uk a good club in south Sheffield 600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1 trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200 "450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for real
i wouldnt personally bother with that one. there are much better equpped models out there non of the components are what i would recomend for a noob.
this thing is going to cost you a fair bit in the long run when you upgrade the components to get it to fly nicely.
Ade
www.accurc.com adrian@accurc.com
This is an apple free zone
anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.
Comment