If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The Logo 10 & Trex are not in the same class as far as size is concerned. The Logo uses 500 - 515MM blades, whilst the Trex uses 315 - 325MM blades, so as you can see there is a fair difference in overall size.
The Logo is a very well made heli, that also flys very well. The drawback is that parts are expensive, and not many shops stock the parts.
The Trex 450v2 is a very nice heli to fly, and because of its size can be flown in places where the Logo would be considered too big. Parts are cheap and plentiful for the Trex, with many retailers stocking them. As an indication of the difference in parts prices, one mainshaft for ther Logo 10 is £12, whilst a pack of 2 mainshafts for the Trex is £9....
Also, the Logo10 has bee superceeded by the Logo 500
As already mentioned different classes,the 450 Se is probably the best 450 sized model at the moment,my experience with Mikado stuff is limited but they are very nice bits of Kit
ive got a logo 500 3d here waiting to be built, i purchased after seeing a mates fly and i was gobsmacked, very very smooth! and very powerful, yep its bigger than a trex 450 and more expencive to set up but its one hell of a heli!!
Comment