servos into rx help

[redbelly82]

hi got my trex 450 and trying to set it up but i dont know what servo plugs in too what on rx help please so i can get this thing working.

[paulsouthport]

Hello mate
Assuming a 6 channel RX with labels
ESC goes to Thro
Front left servo to Aile
Front right to Aux1
Rear to Ele
Gyro main lead to rudder
Rudder servo into Gyro fly lead (or ide of gyro depending on type)
Gyro gain lead (single wire) to gear

There's a whole lot more involved in setting up though. What experience do you have? What make/model 450 is it? What radio gear, ESC, motor, servos and gyro do you have?

[redbelly82]

i have been flying 120 sr msr this is my first ccp helis its a align trex 450 with turnigy tgy-90s servos align ds520 tail sero hk 401 gyro emax hl2215-450 motor
here is a link to it Align trex 450 v2 clone | eBay im using dx6i

[Mark_T]

..its a align trex 450 ...

It is a copy of an Align heli, not the real thing which is why I'm assuming you don't have a manual which would have helped with the questions you have.

You might want to go look at the manual for a real one as it will contain material which is helpful and then as things break you might consider replacing them with genuine parts so it slowly gets closer to the real thing

[redbelly82]

have you looked at the link it started as a real align and has align on the frame do you know how to set these up ?

[Mark_T]

Then the more original Align in there the better, I'd still suggest you look for the original manual online as it will help you get past some of the questions you will have.

Another excellent resource is the various '101' videos from Finless Bob over on HeliFreak : Heli Skills and Setup 101 - LOOK here first! - HeliFreak