electrics build manual

[stevek32]

Hi peeps
sorry about all the help posts,

ok so i just bought copterx 3500kv brushless motor and 50a ESC set 2nd hand and all connections already soldered (£19 posted),
but does anyone know where i can get a diagram of how and where everything connects i've found manuals on how to build 450 v2 heli clone but not the electrics,
also when buying servos how do i know if they will fit? it says 9g servos but if i search for that they look like cheap and nasty plastic jobs, and i dont want to get servos that are to big for the pre-cut holes,
any help pls


steve

[challis349]

Servos wise, most micro servos will be ok, hitec hs65mg, towerpro mg90s, align ds420

[cjcj1949]

The connections are all in the 450SEV2 manual. I've just mentioned which servos go to which channels, but it's in the manual. It won't cause a problem if you get it wrong. Don't connect to the swash until the servo horns are centred and the servos move in the right directions. All in the same direction for collective, aileron left right and elevator back forwords. You may have to adjust servo direction.

Chris

[stevek32]

thanks chris does it make a diff if they are metal geared or plastic? also any recommends on gyro around £20-£30 mark? just bought motor and esc package hope its suitable (see my previous post about 450 clones), like i said its kinda guesswork with me but i know the gyro is important so want to get the right one
many thanks

steve