anyone near hornchurch able to help me check heli and show how to set up please

[rotty81]

hi there all i have done majority of all the build now to mty trex 600n and was woundering if anyone can help with checking it over and the setup also have put the hatori 566 up to the engine and it seems not to fit its the muffler arm thats catching on the carbon frame

[vinny155]

i can help setup the heli but have no experiance with nitro however there are alot of guys on here from the surrounding areas that know about nitro,there are a few from dagenham-dagenham east area,there is also at least one guy on here from hornchurch with a 600 nitro

[rotty81]

hi vinny , thanks mate for the offer , i might take you up on it , i have the trex 600 le and it has been quite a good build , fidly and a little mind boggling lol but i think im getting there its just alot better if you have someone that can perhaps show you as it sinks in better lol

[rotty81]

i have all the servos mounted just need help with getting the servos going so i can get the arms on central etc having problems with the hatori 566 muffler im not sure if i was supposed to be given or told about a manifold extension

[vinny155]

is it flybarred or flybarless,not that it matters but fbl is so much easier,also what electrics are you using,is it all align stuff,when do you want to have a look over it

[sacko]

Get a video up if nobody else is local enough.

As long as you have mounted the servos a per the manual, then it should just be a case of reversing them.

You many need some QuickUk manifold gaskets for the muffler.

[rotty81]

i cant really get a video up mate but vinny whenever your able to lol its flybarred

[rotty81]

flybarless looks sooooo much easier lol

[vinny155]

do you want to bring it to mine or do ya want to pick me up,lack of transport for two more weeks so this is all i can offer,also have you got a pitch gauge,i have one here but vital for setup

[vinny155]

there is also another option,try and get on to jamin on here,we fly at purfleet model heli club on a sunday,jamin is the guy to contact as we fly behind locked gates,plenty of guys down here that will be more than happy to help

[rotty81]

i have not got a pitch gauge yet , i need some wire mesh guard for the servos too

[rotty81]

anyone can contact me on 07534 360606 text or call cheers

[vinny155]

just got your pm there,i have just replied

[ROCKET RONNIE]

Vinny just bring him to PMHC sunday and we can get him up and running good luck

[Jamin_00]

Hi rotty81

More than welcome to bring it over to Purfleet next Sunday.

Plenty of us here to help you out and get you flying


If you do either sort it with Vinny or send me a pm