Blade 400 3D

[Dave G]

I used to fly Helis back in late 70's early80's. I had the Concept 30 DX, self taught myself in the back garden. Ieventually was able to fly circuits, loops, rolls (badly), but I enjoyed it.Tried 3d, from high up and after about 4 or 5 crashes, realised that I couldn'tafford helis and just flew planes. Now some 25 years later and someconsiderable advances in model helis and radios, I have bought a Blade 400 3Dfrom a friend in our club. I fly 35 meg and have a 3 year old Futaba T7CP Fieldforce 7 radio. I am trying to attempt to set this up and wondered if anyone hadany experience of this.
Thanks

[Paulice]

Welcome to the forum, I don't have experience with a blade but some one will chip in soon!

[maderdog_1024]

spooky, i just uploaded the manual on my on web page.

RC-Scotland • View topic - Eflite

Manual HERE

[Dave G]

Hi
I have got the manual but it does not help in any way with setting up with 35meg receiver
Regards Dave

[maderdog_1024]

Futaba T7C 35mhz Manual HERE

and then just adapt boggys settings ;

http://www.rcheliaddict.co.uk/e-flit...ade-400-a.html

Any questions or you get stuck ask.......

[Boggy]

hi Dave welcome to the forum. the best I can offer is have a look at the twister storm manual it has settings for futaba 9cap which should be somewhere near what your after?

http://www.jperkinsdistribution.co.u...s/6600090b.pdf